Plastic Fabrication•Plastic Tank Warranty Plan•Plastic Tank Repair•Plastic Tank Upgrades
Dura Poly Industries, Inc191 Highway 314A
Silver Springs Florida 34488
Ph: (352) 625-5444 • Fax: (352) 625-7488
Mounting Requirements
for Plastic Tanks
| The polypropylene tank will rest on main body support structure above chassis frame, approximately 24" apart, 3" wide members. At these points of contact a marine grade of nylon webbing or good grade of hard rubber is required between the tank and all resting contact points on structure. The lower portion of the tank must be cradled in a 4" sub frame. |
Copyright 2000-2010 by
Dura Poly Industries, Inc.
Dura Poly Industries, Inc.
Web Design by
Haynes Webs
Haynes Webs