 |
Tanks
are made of black, UV stabilized polypropylene |
|
The
outside thickness of all tanks is 1/2" |
|
Each
polypropylene standard skid tank is equipped with longitudinal and transverse baffles
which exceed NFPA Bulletin #1901 requirements. |
|
The
longitudinal and transverse baffles are 3/8" thick |
|
Each
polypropylene standard skid tank is equipped with a 10 inch
square fill tower with a
hinge pin lid and a removable poly screen type strainer. |
|
The
tank serial number is located under the fill tower lid. |
|
Each
polypropylene standard skid tank is equipped with one 3" I.D. Sch'd 40 overflow
vent pipe, piped from the fill tower to the rear of the tank,
recessed at the overflow exit. |
|
Each
polypropylene standard skid tank is equipped with one 1 1/2" NPT female coupling
for pump to tank fill line, equipped with deflection shield
inside the tank. The fill line connection is to be a braided hose
type. |
|
Each
polypropylene standard skid tank is equipped with one 3" NPT female coupling for
tank to pump in front of the tank, piped to the tank floor sump.
Sump is equipped with anti-swirl plate. |
|
Tank
base is 48 inches wide by 92 inches long. |
|
Tank
height depends on gallons and other tank options. |
|
Tank
is equipped with an Internal Sight Gauge Hose Reel Mounts, a
Pump Platform, and Skid Rails. |
|
Polypropylene
standard skid tank mounting is simple cradle style,
strapped, or spring bolted. |
|
Additional
Options available include Foam Cells and Hose Trays. |
